Blanket and leg warmers

Deck accessories include everything on the walking surface and around the edges of the boat: toe rails and handrails, telescopic ladders, awnings and bimini, portholes and deck hatches, gangways, rod holders and engine covers. To get your bearings, start with the type of accessory and the boat it is intended for, because sizes and materials vary greatly from one case to another. Leggi la guida

T-tops, awnings and bimini tops

Step ladders, walkways, platforms

Hatch and manway

Candlesticks, votive holders, cloths

Le marche di Blanket and leg warmers

Osculati Trem Fni Oceansouth Adria Bandiere Lewmar Foresti E Suardi Octopussy Line Nuova Rade Sombrero Douglas Marine Plastimo Marine Town Gebo A.a.a.Oceanair

How to choose accessories for the boat cover

Grab rails, handrails and candle holders

Grab rails and handrails ensure safety while sailing. The most common material is AISI 316 stainless steel, resistant to marine corrosion even in prolonged saline environments. The tube diameter is a fundamental parameter: the ø 25 mm value is among the most requested for standard use. Candle holders must be compatible with the bases already installed on board: check the hole pitch before ordering.

Telescopic ladders and gangways

Telescopic 316 stainless steel ladders are among the most sought-after products in this category. The number of steps, commonly indicated as 3gr or 4gr, determines the immersion depth and the ease of ascent. Aluminum gangways, fixed or folding, are chosen based on the required length and the stern mounting system: Trem proposes both solutions, with dedicated supports for mounting on the transom.

Biminis, T-tops and awnings

The sun cover is chosen first of all based on the width of the console or cockpit. T-tops such as those from Oceansouth are sized for specific console widths: measure carefully before choosing the model. 3-arch biminis, tall or folding, are selected based on the length to be protected. Tessilmare and Osculati cover the most common sizes; for T-tops there are also Sombrero replacement covers, useful when the structure is still intact.

Portholes, hatches and vents

Portholes and hatches are chosen based on the size of the installation compartment and the type of opening. Lewmar is the reference for Low Profile and Standard series hatches, with a range of spare parts, including frames, friction fittings and hinges, that allows you to restore the component without replacing the entire porthole. Nuova Rade nylon vents are available in different shapes, straight, curved and oval, and in various diameters: check the size of the existing hole before purchasing.

Engine covers, rod holders and various accessories

Oceansouth custom-made engine covers are made to measure for the main outboard brands, including Yamaha and Honda, and stand out for their adaptation to the specific profile of the engine. Rod holders are available in 316 stainless steel or nylon, in flush-mount, wall-mounted or angled versions, one or two-piece. Storage pockets and tool holders, such as those from Plastimo and Nuova Rade, are chosen based on the available dimensions and exposure to the elements.

Domande frequenti

Come si misura una scaletta telescopica per barca?

Si conta il numero di gradini utili, tipicamente 3 o 4, e si verifica la lunghezza totale in posizione estesa. È altrettanto importante controllare il sistema di fissaggio e le misure dei fori di montaggio, che variano in base alla poppa o alla plancetta di destinazione.

Qual è la differenza tra bimini e T-top?

Il bimini è una copertura morbida su archi pieghevoli che ripara il pozzetto ed è facilmente smontabile. Il T-top è una struttura rigida fissa montata sopra la console di comando, che offre protezione solare al timoniere e può supportare accessori come luci o antenne.

Posso sostituire solo il telo del mio bimini o T-top senza cambiare la struttura?

Sì, se la struttura è in buone condizioni è spesso sufficiente acquistare un telo di ricambio compatibile. Verifica le misure della struttura, larghezza e profondità, e il tipo di fissaggio ai tubi prima di ordinare.

Come scelgo il coprimotore giusto per il mio fuoribordo?

I coprimotori sartoriali sono realizzati per modelli specifici di motore: è necessario conoscere marca, modello e cilindrata del proprio fuoribordo per abbinare la copertura corretta e ottenere un adattamento preciso.

Nella stessa sezione

Onboard comfort Plumbing and Toilets Mooring and anchoring Electrical system Engine Electronics Maintenance and hardware Inflatables, trolleys and sports Onboard safety